|
Product Name
|
White Musk Fragrance
|
|
Supplier
|
Just a Soap
South East Lodge
Rede Road
Whepstead
Bury St Edmunds
Suffolk
IP29 4ST
Tel: 01284
735043
|
|
Composition/Ingredients Information
|
Definition/Botanical Origin: Fragrance composition: multicomponent
mixture of natural and synthetic aromatic materials.
CAS number
Not
applicable, product is a mixture.
EINECS
number
Not applicable, product is a mixture.
Contains - CAS/EINECS - Hazard Symbols Conc%
(L) Amyl
Cinnamic Aldehyde 122-40-7
N; R 43-51/53
1-5
/204-541-5
Benzyl
Acetate
140-11-4 -; R 24/25 1-5
/205-399-7
(L) BENZYL
BENZOATE
120-51-4 Xn; R 22 >50
/204-402-9
(L)
Citronellol
106-22-9 Xi-N; R
38-43-51/53 1-5
/203-375-0
(L) HEXYL
CINNAMIC ALDEHYDE
101-86-0 Xi; R 43 1-5
/-
(L)
LILIESTRALIS 22 / lysmeral (Treatts) 80-54-6 Xn; R 22-43 1-5
/-
MUSK
KETONE
81-14-1 N; R 50/53 0.1-1
/201-328-9
MUSK
XYLOL
81-15-2 F-N; R
2-11-51/53 1-5
/201-329-4
ORANGE
TERPENES
5989-27-5 F-Xi-N; R
10-38-50/53-65 1-5
/232-433-8
PATCHOULI OIL
POGOSTEMON CABLIN
8014-09-3 Xn-Xi; R 22-36/38 1-5
/-
PHENYL ETHYL
ALCOHOL
60-12-8 Xi; R 36 1-5
/200-456-2
TERPINEOL 98-55-5 Xi; R 36/38 1-5
/202-680-6
TETRALIDE -/- Xn-N; R 22-50/53 1-5
|
|
Hazard Identification
|
General:
When undiluted and not properly
handled, can be
irritating to the skin and eyes
and upon inhalation.
Combustible material that can
sustain a fire.
Hazard symbol
Xn, harmful.
N, dangerous for the
environment.
Risk phrases
R22, harmful if swallowed.
R43, may cause sensitisation by
skin contact.
R51/53, toxic to aquatic
organisms, may cause long term adverse effects in the aquatic environment.
Environment
When spilled, can contaminate
soil, ground and
surface water.
|
|
First Aid Measures
|
Inhalation:
Remove
from exposure site to fresh air. Keep at rest. Obtain medical attention.
Eye contact:
Rinse immediately with plenty of water for at
least 15 mins. Contact a doctor if symptoms persist.
Skin contact:
If irritation occurs wash with soap and water. If symptoms persist
seek medical advice.
Ingestion:
Rinse
mouth out with water. Seek medical advice immediately.
|
|
Fire-Fighting Measures
|
Extinguishing
media RECOMMENDED:
Use
CO2, Dry Powder or Foam Extinguishers, spraying extinguishing media to base
of flames. Do not use direct water jet on burning material.
|
|
Accidental Release Measures
|
Personal
precautions:
Avoid
inhalation and direct contact with skin and eyes. Use individual protective
equipment (safety glasses, waterproof-boots, suitable protective clothing)
in case of major spillages.
Environment
precautions:
Keep
away from drains, soils, surface and groundwaters.
Cleaning
up methods for spillages:
Remove
all potential ignition sources. Contain spilled material. Cover with an
inert or non-combustible inorganic absorbent material, sweep up and remove
to an approved disposal container. Observe state, federal and local
disposal regulations.
|
|
Handling and Storage
|
Precautions
in handling:
Apply
good manufacturing practice and industrial hygiene practices, ensuring
proper ventilation. Observe good personal hygiene, and do not eat, drink or
smoke whilst handling.
Storage
conditions:
Store
in tightly closed original container, in a cool, dry and ventilated area
away from heat sources and protected from light. Keep air contact to a
minimum.
Fire
protection:
Keep
away from ignition sources and naked flames. Take precautions to avoid
static discharges in working area.
|
|
Exposure Control/Personal Protection
|
Respiratory
protection:
Avoid
breathing product vapour. Apply local ventilation where possible.
Ventilation:
Ensure
good ventilation of working area.
Hand
protection:
Avoid
all skin contact. Use chemically resistant gloves if required.
Eye
protection:
Use
safety glasses.
Work/Hygiene
practices:
Wash
hands with soap and water after handling.
|
|
Physical and Chemical Properties
|
Appearance : Pale Liquid
Odour : Characteristic Musk
Flash
point : Not determined.
Oxidising
property None expected.
|
|
Stability and Reactivity
|
Reactivity:
It
presents no significant reactivity hazards, by itself or in contact with
water. Avoid contact with strong acids, alkali or oxidising agents.
Decomposition:
Liable
to cause smoke and acrid fumes during combustion: carbon monoxide, carbon
dioxide and other non-identified organic compounds may be formed.
|
|
Toxicological Information
|
Based on the
ingredients in this composition and their concentrations, this
product is
according to the conventional method of EEC directive 1999/45/EC
classified
as:
May cause sensitisation by skin
contact.
|
|
Ecological Information
|
This material
is unlikely to accumulate in the environment and environmental problems
under normal
use
conditions are unexpected.
|
|
Disposal Considerations
|
Avoid disposing into drainage systems and into the
environment.
|
|
Transport Information
|
Road
(ADR/RID): n/a
Air
(IATA): n/a
Sea
(IMDG): n/a
|
|
Regulatory Information
|
Classification
Packaging / Labelling (Directive 1999/45/EC)
Hazard
symbol
Xn, harmful.
N, dangerous
for the environment.
Contains Amyl
Cinnamic Aldehyde, BENZYL BENZOATE, Citronellol, HEXYL CINNAMIC
ALDEHYDE,
LILIESTRALIS 22 / lysmeral (Treatts).
Risk
phrases
R22, harmful
if swallowed.
R43, may
cause sensitisation by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Safety
phrases
S24, avoid
contact with the skin.
S37, wear
suitable gloves.
S61, avoid
release to the environment.
|
|
Other Information
|
Conc % Limits
(*) : XnR22=38.38% XiR43=50.00%
NR51/53=46.82% R52/53=4.68%
Maximum usage
limited by IFRA.
(*) These are the maximum percent
concentrations that this material can be used in a non-hazardous product
without the indicated risk being applicable to that product.
The
data provided in this material safety data sheet is meant to represent
typical data/analysis for this product and is correct to the best of our
knowledge. The data was obtained from current and reliable sources, but is
supplied without warranty, expressed or implied, regarding its’ correctness
or accuracy. It is the user's responsibility to determine safe conditions
for the use of this product, and to assume liability for loss, injury,
damage or expense arising from improper use of this product. The
information provided does not constitute a contract to supply to any
specification, or for any given application, and buyers should seek to
verify their requirements and product use.
|