|
Product Name
|
Vanilla Flavour Oil
|
|
Supplier
|
Just a Soap
South East Lodge
Rede Road
Whepstead
Bury St Edmunds
Suffolk
IP29 4ST
Tel: 01284
735043
|
|
Composition/Ingredients Information
|
Chemical identification:
Fragrance composition: multicomponent mixture of natural and synthetic
aromatic materials.
CAS
number : Not applicable,
product is a mixture.
EINECS
number : Not applicable,
product is a mixture.
|
|
Hazard Identification
|
General: When undiluted and not properly handled,
can be irritating to the skin and eyes and upon inhalation.
Combustible
material that can sustain a fire
This material
is not classified as dangerous according to directive 1999/45/EC.
|
|
First Aid Measures
|
Inhalation
Remove from
exposure site to fresh air, keep at rest, and obtain medical attention.
Eye
exposure
Flush
immediately with water for at least 15 minutes.
Contact
physician if symptoms persist.
Skin
exposure
Remove
contaminated clothes. Wash thoroughly with
soap and
water. Contact physician if irritation persists.
Ingestion
Rinse mouth
with water and obtain medical attention.
|
|
Fire-Fighting Measures
|
Extinguishing
media
Carbon
dioxide, dry chemical, foam. Do not use a direct water-jet on burning
material.
|
|
Accidental Release Measures
|
Personal
precautions:
Avoid
inhalation and direct contact with skin and eyes. Use individual protective
equipment (safety glasses, waterproof-boots, suitable protective clothing)
in case of major spillages.
Spillage
Remove
ignition sources. Provide adequate ventilation. Avoid excessive inhalation
of vapours.
Gross
spillage should be contained immediately by use of sand or inert powder and
disposed of according to local regulations.
Environmental
precautions
Keep away
from drains, surface and ground water, and
soil.
|
|
Handling and Storage
|
Precautions
in handling:
Apply
good manufacturing practice and industrial hygiene practices, ensuring
proper ventilation. Observe good personal hygiene, and do not eat, drink or
smoke whilst handling.
Storage
conditions:
Store
in tightly closed original container, in a cool, dry and ventilated area
away from heat sources and protected from light. Keep air contact to a
minimum.
Fire
protection:
Keep
away from ignition sources and naked flames. Take precautions to avoid static
discharges in working area.
|
|
Exposure Control/Personal Protection
|
Respiratory
protection:
Avoid
breathing product vapour. Apply local ventilation where possible.
Ventilation:
Ensure
good ventilation of working area.
Hand
protection:
Avoid
all skin contact. Use chemically resistant gloves if required.
Eye
protection:
Use
safety glasses.
Work/Hygiene
practices:
Wash
hands with soap and water after handling.
|
|
Physical and Chemical Properties
|
Appearance Brown coloured liquid.
Odour :
Characteristic vanilla.
Flash
point : Not determined.
Oxidising
property None expected.
|
|
Stability/Reactivity
|
Reactivity:
It
presents no significant reactivity hazards, by itself or in contact with
water. Avoid contact with strong acids, alkali or oxidising agents.
Decomposition:
Liable
to cause smoke and acrid fumes during combustion: carbon monoxide, and
other non-identified organic compounds may be formed.
|
|
Toxicological Information
|
Based on the
ingredients in this composition and their concentrations, this product is
according to the conventional method of EEC directive 1999/45/EC
classified
as:
safe when used as
directed.
|
|
Ecological Information
|
This material
is unlikely to accumulate in the environment and environmental
problems under normal
use conditions are unexpected.
|
|
Disposal Considerations
|
Avoid disposing into drainage systems and into the
environment.
|
|
Transport Information
|
Road
(ADR/RID): n/a
Air
(IATA): n/a
Sea
(IMDG): n/a
|
|
Regulatory Information
|
Classification
Packaging / Labelling (Directive 1999/45/EC)
|
|
Other Information
|
Conc % Limits
(*) :
(*) These are
the maximum percent concentrations that this material can be used in a
non-hazardous product without the indicated risk being applicable to that
product.
The
data provided in this material safety data sheet is meant to represent
typical data/analysis for this product and is correct to the best of our
knowledge. The data was obtained from current and reliable sources, but is
supplied without warranty, expressed or implied, regarding its’ correctness
or accuracy. It is the user's responsibility to determine safe conditions
for the use of this product, and to assume liability for loss, injury,
damage or expense arising from improper use of this product. The
information provided does not constitute a contract to supply to any
specification, or for any given application, and buyers should seek to
verify their requirements and product use.
|