|
Product Name
|
Shampoo Base
|
|
Supplier
|
Just A Soap
SE Lodge
Rede Road
Whepstead
IP29 4ST
Tel/Fax: 01284
735043/735035
|
|
Composition/Ingredients Information
|
Aqua
Propylene glycol (CAS no.
57-55-6: EINECS no. 200-338-0)
Sodium
stearate (CAS no. 822-16-2: EINECS no. 212-490-5)
Sodium
laureth sulfate (CAS no. 9004-82-4: 1335-72-4)
Glycerin
(CAS no. 56-81-5: EINECS no. 200-289-5)
Sorbitol
(CAS no. 50-70-4: EINECS no 200-061-5)
Sodium
cocoate (CAS no. 61789-31-9: EINECS no. 263-050-4)
Sodium
xylene sulfonate (CAS no. 1300-72-7: EINECS 215-090-9)
Sodium
lauryl sulfate (CAS no. 151-21-3: EINECS no. 205-788-1)
Stearic
acid (CAS no. 57-11-4: EINECS no. 200-313-4)
Acrylamide
Copolymer/Acrylamidopropyltrimonium Chloride,
Tetrasodium
EDTA (CAS no. 64-.2-8: EINECS no.200-573-9)
Tetrasodium
etidronate (CAS no. 37-94-83-0: EINECS no.223-267-7)
Hazardous
Ingredients: None
|
|
Hazard Identification
|
This product is not classified as
dangerous under CHIP regulations and amendments.
|
|
First Aid Measures
|
Skin contact: N/A
Eye Contact: Thoroughly rinse with
plenty of clean water.
Inhalation: N/A
Ingestion: Give milk preferably, or
water to dilute. Do not induce vomiting. If symptoms persist seek medical
advice.
|
|
Fire-Fighting Measures
|
The product itself is not classified
as flammable, but will decompose producing acrid smoke if exposed to high
temperatures. Breathing apparatus may be required.
Extinguishing media: Foam, dry powder
or carbon dioxide extinguishers.
|
|
Accidental Release Measures
|
Avoid contact with water. Remove
product and dispose of in an approved manner.
Observe any local waste disposal
regulations.
|
|
Handling and Storage
|
Storage: Store the product in a clean
dry place at ambient temperature.
Handling: Provide suitable mechanical
equipment for the safe handling of heavy packages.
|
|
Exposure Control/Personal Protection
|
On the basis of information available
this products is not hazardous. Prolonged exposure may in very few cases
produce skin sensitivity. Skin should be dried thoroughly after use.
|
|
Physical and Chemical Properties
|
Appearance: Translucent block.
Odour: Mild, characteristic soapy.
pH value: 9.5 – 10.5 (1% aqueous
solution)
Solubility: Miscible in all
proportions.
Thermal decomposition temperature: Approx
150 deg C.
|
|
Stability/Reactivity
|
Stability: Stable. Will not promote
hazardous reactions.
Reactivity: Will decompose above
approx 150 deg C to produce acrid smoke.
|
|
Toxicological Information
|
Not animal tested.
Inhalation: N/A
Skin contact: N/A
Eye contact: Can be an irritant.
Ingestion: Mild gastric irritation.
|
|
Ecological Information
|
This product is essentially non-toxic
and non-hazardous.
Fully biodegradable.
Aquatic environment: Will not promote
eutrophication.
|
|
Disposal Considerations
|
Dispose of waste only in accordance
with local or national regulations.
|
|
Transport Information
|
Not hazardous according to transport
regulations.
|
|
Regulatory Information
|
CHIP regulations and amendments: Not
classified.
|
|
Other Information
|
This information relates only to the specific
product designated and may not be valid for such product used in
combination with any other materials or processes. Such information is, to the best of Just
A Soap’s knowledge and belief, accurate and reliable as of the date
indicated. However, no
representation, warranty or guarantee is made as to its accuracy,
reliability or completeness. It is
the user's responsibility to satisfy themselves as to the suitability of
such information for their own particular use.
|