Product Name

Pineapple Flavour Oil

Supplier

Just a Soap

South East Lodge

Rede Road

Whepstead

Bury St Edmunds

Suffolk

IP29 4ST

 
Tel: 01284 735043

Composition/Ingredients Information

Chemical identification: Fragrance composition: multicomponent mixture of natural and synthetic aromatic materials.

CAS number             : Not applicable, product is a mixture.

EINECS number          : Not applicable, product is a mixture.

Contains: Allyl Caproate FCC

Ingredients with an Occupational Exposure Limit

3-Methylbutylacetate CAS: 628-63-7 EINECS:211-047-3 (1-10%)

Hazard Identification

General:  When undiluted and not properly handled, can be irritating to the skin and eyes and upon inhalation.

Combustible material that can sustain a fire

 

Hazard symbol   

Xn, harmful.

N, dangerous for the environment.

 

Risk phrases

R21//22, harmful in contact with skin and if swallowed.

R36/37/38 , irritating to the eyes, respiratory system and skin.

R51/53, toxic to aquatic organisms, may causelong term adverse effects in the aquatic environment.

First Aid Measures

Inhalation

Remove from exposure site to fresh air, keep at rest, and obtain medical attention.

 

Eye exposure       

Flush immediately with water for at least 15 minutes.

Contact physician if symptoms persist.

 

Skin exposure          

Remove contaminated clothes. Wash thoroughly with

soap and water. Contact physician if irritation persists.

 

Ingestion             

Rinse mouth with water and obtain medical attention.

Fire-Fighting Measures

Extinguishing media

 

Carbon dioxide, dry chemical, foam. Do not use a direct water-jet on burning material.

Accidental Release Measures

Personal precautions:         

Avoid inhalation and direct contact with skin and eyes. Use individual protective equipment (safety glasses, waterproof-boots, suitable protective clothing) in case of major spillages.

 

Spillage          

Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours.

Gross spillage should be contained immediately by use of sand or inert powder and disposed of according to local regulations.

 

Environmental precautions    

Keep away from drains, surface and ground water, and

soil.

 

Handling and Storage

Precautions in handling:

Apply good manufacturing practice and industrial hygiene practices, ensuring proper ventilation. Observe good personal hygiene, and do not eat, drink or smoke whilst handling.

 

Storage conditions:             

Store in tightly closed original container, in a cool, dry and ventilated area away from heat sources and protected from light. Keep air contact to a minimum.

 

Fire protection:                    

Keep away from ignition sources and naked flames. Take precautions to avoid static discharges in working area.

Exposure Control/Personal Protection

Respiratory protection:       

Avoid breathing product vapour. Apply local ventilation where possible.

 

Ventilation:                           

Ensure good ventilation of working area.

 

Hand protection:                  

Avoid all skin contact. Use chemically resistant gloves if required.

 

Eye protection:                    

Use safety glasses.

 

Work/Hygiene practices:    

Wash hands with soap and water after handling.

Physical and Chemical Properties

Appearance            Not determined.

Odour                  :   Not determined.

Flash point            : Not determined.

Oxidising property  None expected.

Stability/Reactivity

Reactivity:                             

It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidising agents.

 

Decomposition:                   

Liable to cause smoke and acrid fumes during combustion: carbon monoxide, and other non-identified organic compounds may be formed.

Toxicological Information

Based on the ingredients in this composition and their concentrations, this product is according to the conventional method of EEC directive 1999/45/EC

classified as:

Hamful in contact with the skin and if swallowed.

Irritating to the eyes, respiratory system and skin.

Ecological Information

This material is unlikely to accumulate in the                          environment and environmental problems under normal

 use conditions are unexpected.

Disposal Considerations

Avoid disposing into drainage systems and into the environment. 

Transport Information

Road (ADR/RID):                 n/a

Air (IATA):                             n/a

Sea (IMDG):                          n/a

Regulatory Information

Classification Packaging / Labelling (Directive 1999/45/EC)

 

Hazard symbol   

Xn, harmful.

N, dangerous for the environment.

Contains Allyl Caproate FCC A0700-0.

 

Risk phrases  

R21/22 harmful in contact with skin and if swallowed.

R36/37/38 irritating to yes, respiratory system and skin.

R51/53 toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.

 

Safety phrases        

S26, in case of contact with eyes, rinse immediately

with plenty of water and seek medical advice.

S61, avoid release to the environment.

S36/37 wear suitable protective clothing and gloves.

Other Information

Conc % Limits (*)      : XnR21=83.33% Xnr22=49.02% XiR36=76.92% XiR37=83.33% XiR38=76.92% NR51/53=83.33% R52/53=8.33% R53=8.33%

 

(*) These are the maximum percent concentrations that this material can be used in a non-hazardous product without the indicated risk being applicable to that product.

 

The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use.