Product Name	Castor Oil BP
Supplier	Just a Soap South East Lodge Rede Road Whepstead Bury St Edmunds Suffolk IP29 4ST Tel: 01284 735043
Composition/Ingredients Information	A naturally occurring triglyceride vegetable oil and is the highest grade of oil obtained from the castor oil bean. CAS no: 8001-79-4 EINECS: 292-293-8
Hazard Identification	No critical hazards which warrant special labelling as this oils is safe. Pressure injection: will cause severe internal damage if not properly treated.
First Aid Measures	Inhalation: n/a Eye contact: Rinse immediately with plenty of water for at least 15 minutes. Contact a doctor if pain, blinking, tears or redness persists. Skin Contact: Wash thoroughly with mild soap and water. Prolonged exposure may lead to reddening on sensitive skin. Ingestion: No problems if ingested. Will have purgative effects.
Fire-Fighting Measures	Flammable: Not flammable. Flash Point: > 300ºC. General: if involved in fire conditions will burn to give a dense acrid smoke, especially if absorbed onto burning wood etc. Extinguishing media: carbon dioxide. Dry chemical. Foam. Water spray – DO NOT use direct water spray. Combustion products: carbon oxides or carbon and trace oxides of sulphur.
Accidental Release Measures	Personal precautions: Equip clean up crew with proper protection. Environment precautions: Notify authorities if liquid enters public waters. Cleaning up methods for spillages: Remove all potential ignition sources. Contain spilled material. Cover with an inert or non-combustible inorganic absorbent material, sweep up and remove to an approved disposal container. Observe state, federal and local disposal regulations.
Handling and Storage	Precautions in handling: Apply good manufacturing practice and industrial hygiene practices, ensuring proper ventilation. Observe good personal hygiene, and do not eat, drink or smoke whilst handling. Storage conditions: Store in tightly closed original container, in a cool, dry and ventilated area away from heat sources and protected from light. Keep air contact to a minimum.
Exposure Control/Personal Protection	Eye contact: wear goggles if handling hot oil.
Physical and Chemical Properties	Colour: nearly colourless or faintly yellow. Relative density at 20ºC – 0.952-0.965 Extinctions: 1.0 max @ 268/270mm Moisture: 0.3% maximum Iodine Value: 82-90 Saponification value: 176-187 Acid valid: 2.0 maximum Unsaponfiables w/w : 0.8% maximum Optical rotation: between +3.5º and 6.0º Hydroxyl value: 150 minimum Peroxide value: 5.0 max Light absorption: 1.0 max Specification conforms to the British Pharmacopoeia and relevant amendments.
Stability/Reactivity	Stable: Contamination with alkalis will for soaps and hot conc acids will char the oil.
Toxicological Information	General: Castor Oil BP is a vegetable oil and can be thought of as something similar to “cooking oil”. Oral: may be taken internally. Skin contact: very little effect. Inhalation: Not application under normal use. Eye contact: a bland oil, although any eye contact should be dealt with immediately.
Ecological Information	No long term damage to the environment is envisaged. If the oil enters streams and rivers in large quantities it will cut off the oxygen supply to aquatic life. Completely biodegradable.
Disposal Considerations	Avoid disposing into drainage systems and into the environment.
Transport Information	Non hazardous.
Regulatory Information	Labelling information. Hazards: none Symbols: none Risk Phrases: none Safety Phrases: n/a
Other Information	The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use.