Product Name	Babbassu Nut Oil
Supplier	Just a Soap South East Lodge Rede Road Whepstead Bury St Edmunds Suffolk IP29 4ST Tel: 01284 735043
Composition/Ingredients Information	INCI name: Orbignya oleifera CAS no: 91078-92-1 EINECS Number: 293-376-2 Status: natural Additives: none Application: skincare, aromatherapy IFRA: not restricted
Hazard Identification	Concentrated product. Observe good housekeeping procedures.
First Aid Measures	Inhalation: No vapours present at normal temperatures. Eye contact: Rinse immediately with plenty of water for at least 15 minutes. Contact a doctor if pain, blinking, tears or redness persists. Skin Contact: Wash thoroughly with mild soap and water. Ingestion: Not considered dangerous. Edible quality.
Fire-Fighting Measures	Extinguishing media: carbon dioxide. Dry chemical. Foam. Water spray – DO NOT use direct water spray.
Accidental Release Measures	Personal precautions: Equip clean up crew with proper protection. Environment precautions: Notify authorities if liquid enters public waters. Cleaning up methods for spillages: Remove all potential ignition sources. Contain spilled material. Cover with an inert or non-combustible inorganic absorbent material, sweep up and remove to an approved disposal container. Observe state, federal and local disposal regulations.
Handling and Storage	Precautions in handling: Apply good manufacturing practice and industrial hygiene practices, ensuring proper ventilation. Observe good personal hygiene, and do not eat, drink or smoke whilst handling. Storage conditions: Store in tightly closed original container, in a cool, dry and ventilated area away from heat sources and protected from light. Keep air contact to a minimum.
Exposure Control/Personal Protection	Respiratory protection: No special respiratory equipment is recommended under normal conditions of use with adequate ventilation. Eye protection: Use safety glasses if risk of splashing. Work/Hygiene practices: Wash hands with soap and water after handling.
Physical and Chemical Properties	Appearance: white solid, clear and bright when melted. Odour: free from rancid and foreign odours. Melting Point ºC – 21-27 Flash Point ºC >300 Solubility in alcohol: soluble Solubility in water: insoluble Peroxide Value (meq 0^2/kg) : 1 max. Iodine value: 8-14 max. Moisture % : 0.1 max
Stability/Reactivity	Reactivity: it presents no significant reactivity hazards, by itself or contact with water. Avoid contact with strong acids, alkali or oxidising agents.
Toxicological Information	No data available.
Ecological Information	Readily biodegradable. Precautions: prevent surface contamination of soil, ground and surface water.
Disposal Considerations	Avoid disposing into drainage systems and into the environment.
Transport Information	General information: not regulated.
Regulatory Information	Labelling information. Hazards: n/a Symbols: n/a Risk Phrases: n/a Safety Phrases: n/a
Other Information	Packaging Type Suitability Glass Yes Lacquer lined steel/tin Yes Aluminium Yes HPPE Yes F/HDPE Yes Other plastic Yes The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use.