Product Name

Almond Milk  Fragrance

Supplier
Just a Soap

South East Lodge

Rede Road

Whepstead

Bury St Edmunds

Suffolk

IP29 4ST

 
Tel: 01284 735043

Composition/Ingredients Information

Definition/Botanical Origin: Fragrance composition: multicomponent mixture of natural and synthetic aromatic materials.

CAS number             : Not applicable, product is a mixture.

EINECS number          : Not applicable, product is a mixture.

Contains  - CAS/EINECS  -  Hazard Symbols            Conc%

ACETOPHENONE                             98-86-2      Xn; R 22-36                 1-5

                                         /202-708-7

Benzaldehyde                             100-52-7     Xn; R 22                   5-25

                                         /202-860-4

(L) Cinnamic Alcohol                     0000104-54-1 Xi; R 43                    1-5

                                         /203-212-3

LILIESTRALIS 33  AKA MEFLORAL            80-54-6      Xn; R 22-43                 1-5

                                         /-

PHENYL ETHYL ALCOHOL                     60-12-8      Xi; R 36                    1-5

                                         /200-456-2

TERPINEOL                                98-55-5      Xi; R 36/38                5-25

                                         /202-680-6

(L) TETRALIDE                            -/-          Xn-N; R 22-50/53            1-5

 

Ingredients with an Occupational Exposure Limit

DEP-PALATINOL A CAS:84-66-2 EINECS:- (>10%)

 

 

Hazard Identification

General:

When undiluted and not properly handled, can be

irritating to the skin and eyes and upon inhalation.

Combustible material that can sustain a fire.

 

Risk phrases          

R52/53, Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Environment           

When spilled, can contaminate soil, ground and

surface water.

First Aid Measures

Inhalation:                             

Remove from exposure site to fresh air. Keep at rest. Obtain medical attention.

 

Eye contact:                         

Rinse immediately with plenty of water for at least 15 mins. Contact a doctor if symptoms persist.

 

Skin contact:

If irritation occurs wash with soap and water. If symptoms persist seek medical advice.

 

Ingestion:                              

Rinse mouth out with water. Seek medical advice immediately.

Fire-Fighting Measures

Extinguishing media RECOMMENDED:

Use CO2, Dry Powder or Foam Extinguishers, spraying extinguishing media to base of flames. Do not use direct water jet on burning material.

Accidental Release Measures

Personal precautions:         

Avoid inhalation and direct contact with skin and eyes. Use individual protective equipment (safety glasses, waterproof-boots, suitable protective clothing) in case of major spillages.

 

Environment precautions:   

Keep away from drains, soils, surface and groundwaters.      

 

Cleaning up methods for spillages:           

Remove all potential ignition sources. Contain spilled material. Cover with an inert or non-combustible inorganic absorbent material, sweep up and remove to an approved disposal container. Observe state, federal and local disposal regulations.

Handling and Storage

Precautions in handling:

Apply good manufacturing practice and industrial hygiene practices, ensuring proper ventilation. Observe good personal hygiene, and do not eat, drink or smoke whilst handling.

 

Storage conditions:             

Store in tightly closed original container, in a cool, dry and ventilated area away from heat sources and protected from light. Keep air contact to a minimum.

 

Fire protection:                    

Keep away from ignition sources and naked flames. Take precautions to avoid static discharges in working area.

Exposure Control/Personal Protection

Respiratory protection:       

Avoid breathing product vapour. Apply local ventilation where possible.

 

Ventilation:                           

Ensure good ventilation of working area.

 

Hand protection:                  

Avoid all skin contact. Use chemically resistant gloves if required.

 

Eye protection:                    

Use safety glasses.

 

Work/Hygiene practices:    

Wash hands with soap and water after handling.

Physical and Chemical Properties

Colour/Appearance: not determined.        

Odour:  not determined.

Flash point:   Not determined.

Oxidising property: none expected.

Relative density: 1.0430 @ 20ºC

Stability and Reactivity

Reactivity:                             

It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidising agents.

 

Decomposition:                   

Liable to cause smoke and acrid fumes during combustion: carbon monoxide, carbon dioxide and other non-identified organic compounds    may be formed.

Toxicological Information

Based on the ingredients in this composition and their concentrations, this

product is according to the conventional method of EEC directive 1999/45/EC

classified as:

May cause sensitisation by skin contact.

Ecological Information

This material is unlikely to accumulate in the environment and environmental problems under normal

use conditions are unexpected.

 

Disposal Considerations

Avoid disposing into drainage systems and into the environment. 

Transport Information

Road (ADR/RID):                 n/a

Air (IATA):                             n/a

Sea (IMDG):                          n/a

Regulatory Information

Classification Packaging / Labelling (Directive 1999/45/EC)

Contains Cinnamic Alcohol, TETRALIDE.

Risk phrases          

R52/53, Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

 

Safety phrases        

S61, Avoid release to the environment. Refer to special instructions/safety data sheet.

 

Other Information

Conc % Limits (*)      : R52/53=25.00% IFRA=18.533%

 

(*) These are the maximum percent concentrations that this material can be used in a non-hazardous product without the indicated risk being applicable to that product.

 

The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use.